LED displays round battery indicator

battery indicator 12V 24V 36V 48V 72V 96V 120V 14 For lead-acid battery Short-circuit function

Battery Indicator

Specifications

Spec	Model	Nominal Voltage
Round	TCDL-H-12V	12V
	TCDL-H-24V	24V
	TCDL-H-36V	36V
	TCDL-H-48V	48V
	TCDL-H-72V	72V
	TCDL-H-96V	96V
	TCDL-H-120V	120V
	TCDL-H-144V	144V

Technical Specifications

System Voltages	12V,24V,36V,48V,72V,96V,120V,144V
Operating Voltage	+25%~-50% of nominal voltage
Operating Temperature	-40°C~+55°C
Storage Temperature	-50°C~+90°C
Shock & Vibration	Meets SAEJ1378

Module Configuration

Terminal:

1-Battery Cathode

2-Battery Anode

3-Output control signal. When it works correctly, outputs 5V(10k Ohm). When it runs out of battery, no voltage outputs and the resistance is 5K Ohm

4- Connect the Key Switch to the battery cathode to turn on, and open the circuit or connect it to the earth to turn off.

Features

1. All principal circuits are integrated in a single chip for long-life and reliability.2. A 10-bar LED displays the state of charge successively, bar by bar, from full to empty.3. At 70% depth of discharge(30% S.O.C), a flashing LED signals energy reserve alert.4. At 80% discharge, alternately flashing LEDs provides an "empty" status warning.5. The TCDL recognizes an improperly charged battery.6. High Voltage Reset-HVR Gauge must measure 2.35

volts per cell for 6 continuous minutes during charging.   

7. The key switch drives the LED and control pin #3. The LED does not display when the control pin #3 outputs 0V, so when pin #3=0V to shut off the electric equipment, the LED will also not display.

LED displays round battery indicator